Water reuse and recovery

Page
Set Descending Direction
  1. There are more products that fulfill technical criteria for your country available through vendors from abroad.
  2. Blueline II 10000l

    BlueLine II is an underground polyethylene tank from Rewatec for collecting rainwater. BlueLine II is made of ecological polyethylene (PE - MDPE) by rotational molding, or rotomoulding. The tank due to its monolithic construction (one element, without joints and welding) is extremely durable and stable, it is possible to cover the tank with soil up to 1.5 m (backfill). Manufacturer's tests confirm 100% tank tightness - 25 years warranty. Each Rewatec underground tank after production is subject to intensive quality control. In addition, the tanks are subjected to selective pressure control using complex and extreme loads simulating ground conditions.
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    10.000 m3
    Tank material
    Polyethylene
  3. KRL-551 Horizontal tank krugliy

    "Volume: 550 liters Dimensions: 1280 * 850 * 830 Manhole diameter: 380 mm Material: polyethylene"
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Above ground
    Capacity
    0.550 m3
    Tank material
    Polyethylene
  4. 3P Arcado 230l sandy

    The rainwater reservoir, thanks to a faithful representation of nature, resembles a stone or a small brick well. The water supply is located on the side, at the top of it. The 3/4" brass thread can be screwed in.
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Above ground
    Capacity
    0.230 m3
    Tank material
    Polyethylene
  5. AQUATOWER 1,0

    Aboveground, non-pressure tank, manufactured in the rotational molding technology, intended for the storage and retention of rainwater.
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Above ground
    Capacity
    1.000 m3
    Tank material
    Polyethylene
  6. Water 3000

    WATER is an underground rainwater tank. It is made by rotomolding, which ensures 100% product tightness. The inlet channel is installed using an in-situ gasket. The tank is intended only for installation in the ground.
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    3.000 m3
    Tank material
    Polyethylene
  7. KRL-1005 Horizontal tank turki

    " Volume: 1000 liters Dimensions: 1360 * 920 * 1010 Manhole diameter: 380 mm Material: polyethylene"
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Above ground
    Capacity
    1.000 m3
    Tank material
    Polyethylene
  8. IPB5000 Horizontal tank

    Volume: 5000 liters Material: polyethylene
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Above ground
    Capacity
    5.000 m3
    Tank material
    Polyethylene
  9. Tank Titan Aqua capacity 4500l

    complete tank with overflow and overflow, collecting filter installed, with rise pipe, without cover, without pump, without collection
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    4.500 m3
    Tank material
    Polyethylene
  10. Tank Titan Aqua capacity 3000l

    complete tank with overflow and overflow, collecting filter installed, with rise pipe, without cover, without pump, without collection
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    3.000 m3
    Tank material
    Polyethylene
  11. IAP MP 7000

    Suitable for the accumulation and the recovery of rain water
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    6.350 m3
    Tank material
    Polyethylene
  12. IAP MN 21000

    Suitable for the accumulation and the recovery of rain water
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    19.130 m3
    Tank material
    Polyethylene
  13. Water 5000

    WATER is an underground rainwater tank. It is made by rotomolding, which ensures 100% product tightness. The inlet channel is installed using an in-situ gasket. The tank is intended only for installation in the ground.
    Add to List
    Type of tank
    Equipped with calmed inlet and overflow (provided as manufacturer's auxilliary equipment)
    Instalation type
    Under ground
    Capacity
    5.000 m3
    Tank material
    Polyethylene
Page
Set Descending Direction