Land preparation and seeding

Filters
Country  
Area of use  
Category  
Technology  
Manufacturer  
  1. Agro Tom 1 item
  2. Akpil 3 items
  3. Bomet 8 items
  4. Bozamet 1 item
  5. CASE IH 1 item
  6. JOHN DEERE 3 items
  7. KVERNELAND 1 item
  8. Land Stal 2 items
  9. Lemken 2 items
  10. MASCHIO GASPARDO 1 item
  11. MCMS Warka Sp. z o.o. 1 item
  12. Mandam 24 items
  13. Matermacc 6 items
  14. Rolmako 2 items
  15. VADERSTAD 2 items
  16. Vaderstad 2 items
show more show less
Available through local vendor  
Stone safety device  
Seeding type  
Mode seed placement  
Page
Set Descending Direction
  1. There are more products that fulfill technical criteria for your country available through vendors from abroad.
  2. GSC 300

    Curved undercut teeth with a chisel (replaceable coulters) Support wheels Tear-off or spring protection NON-STOP Body spacing 56 cm Frame height 90 cm Adjustable tooth spacing
    Add to List
    Tractor power requirements
    140.000000 HP
    Working width
    300.000000 cm
    Row spacing
    46.000000 cm
    Number of shanks/tines
    4.000000
    Stone safety device
    Spring
    Working depth
    55.000000 cm
  3. GSC 300

    Curved undercut teeth with a chisel (replaceable coulters) Support wheels Tear-off or spring protection NON-STOP Body spacing 56 cm Frame height 90 cm Adjustable tooth spacing
    Add to List
    Tractor power requirements
    140.000000 HP
    Working width
    300.000000 cm
    Row spacing
    46.000000 cm
    Number of shanks/tines
    4.000000
    Stone safety device
    Spring
    Working depth
    55.000000 cm
  4. GZW 3

    The subsoiler is intended for crushing and loosening the soil in order to improve its physical and biological properties. The subsoiler loosens the soil layer, which is not moved by plowing, and allows it to better absorb and oxygenate, which promotes the development of plant roots. As a result of subsoiling, fertilizers are moved to deeper layers of soil. It should be used on medium and firm soils, as well as on light soils with impermeable ground. The subsoiler ensures proper loosening to a depth of 60 cm. The subsoiler is high equipment. The subsoiler is equipped with a tubular roller, whose task is to regulate the depth of work and level the soil after passing the subsoiler.
    Add to List
    Tractor power requirements
    80.000000 HP
    Working width
    220.000000 cm
    Row spacing
    70.000000 cm
    Number of shanks/tines
    3.000000
    Stone safety device
    Shear bolt
    Working depth
    60.000000 cm
  5. Musca U476

    The Musca subsoiler is intended only for deep loosening of the soil, and the comb combing it rakes and levels the surface of the uplifted soil, which reduces the evaporation of water from the soil and accelerates the emergence of seeded seeds during harvesting. The treatment should be applied on fields with a "plow sole", preferably after harvesting, when the soil is desiccated, and in a subsoiled field should not be carried out too soon to reduce soil re-compaction. The subsoiler can also be used to prepare the soil before planting fruit trees, berry shrubs and deep-rooted plants.
    Add to List
    Tractor power requirements
    96.000000 HP
    Working width
    2.250000 cm
    Row spacing
    0.750000 cm
    Number of shanks/tines
    3.000000
    Stone safety device
    Shear bolt
    Working depth
    45.000000 cm
  6. GZ/M

    Subsoilers are machines mounted on a three-point tractor suspension system (TUZ), designed to work with agricultural tractors of 0.6 ÷ 0.9T class. Working elements are claws (900 mm) with replaceable coulters (100 mm) and a mole attached to the chain. The subsoilers are intended for crushing and loosening the subsoil. This is to make it easier for plant roots to penetrate into the inner layers of the soil, increase water and air permeability, to allow fertilizers to move to deeper layers of the soil and to prevent water clogging. Subsoiled soils do not require the use of deep plowing, and some plants can be grown using only tillage tools. The machine structure was made of welded and bolted steel elements.
    Add to List
    Tractor power requirements
    61.000000 HP
    Working width
    130.000000 cm
    Row spacing
    0.000000 cm
    Number of shanks/tines
    1.000000
    Stone safety device
    Shear bolt
    Working depth
    70.000000 cm
  7. CLG-II

    Small sized subsoiler with two shanks, a working depth of 55-65 cm and a tractor power requirement of 140 hp. The working width is 1.2-2.25 m and for protection it is equipped with a spring protection stone safety device.
    Add to List
    Tractor power requirements
    140.000000 HP
    Working width
    225.000000 cm
    Row spacing
    113.000000 cm
    Stone safety device
    Spring
    Working depth
    55.000000 cm
  8. Armes 3,0

    Subsoiler Armes. Max depth 60 cm.
    Add to List
    Tractor power requirements
    150.000000 HP
    Working width
    300.000000 cm
    Row spacing
    60.000000 cm
    Stone safety device
    Shear bolt
    Working depth
    60.000000 cm
  9. Armes 2,5

    Subsoiler Armes. Max depth 60 cm.
    Add to List
    Tractor power requirements
    120.000000 HP
    Working width
    250.000000 cm
    Row spacing
    63.000000 cm
    Stone safety device
    Shear bolt
    Working depth
    60.000000 cm
  10. Armes 1,8

    Subsoiler Armes. Max depth 60 cm.
    Add to List
    Tractor power requirements
    90.000000 HP
    Working width
    180.000000 cm
    Row spacing
    60.000000 cm
    Stone safety device
    Shear bolt
    Working depth
    60.000000 cm
  11. GHL 5

    The subsoiler is intended for deep loosening. Machines of this type have a strong construction that is necessary when working at a greater depth than plowing. The Agro-Tom GHL subsoiler, thanks to the use of modern teeth, is adapted to perform deep loosening up to 50 cm. Thanks to this, we can improve soil absorption, loosen places particularly vulnerable to compacting min. tramways and headlands. In addition to the loosening tine section, the GHL is equipped with a tubular roller. At the customer's request, instead of the tube roller, we can install a double barbed roller known for use in the GSH XL chisel plow. The use of this roller ensures adequate seasoning and leveling of cultivated soil. The machine is available with 3 and 5 teeth. Depending on the version, tractors with power from 120 HP to 300 HP are required to work with the GHL subsoiler. Standard equipment includes cured carbide coulters and hydraulic stone coulter protection.
    Add to List
    Tractor power requirements
    180.000000 HP
    Working width
    300.000000 cm
    Row spacing
    60.000000 cm
    Stone safety device
    Hydraulic
    Working depth
    50.000000 cm
  12. GHL 3

    The subsoiler is intended for deep loosening. Machines of this type have a strong construction that is necessary when working at a greater depth than plowing. The Agro-Tom GHL subsoiler, thanks to the use of modern teeth, is adapted to perform deep loosening up to 50 cm. Thanks to this, we can improve soil absorption, loosen places particularly vulnerable to compacting min. tramways and headlands. In addition to the loosening tine section, the GHL is equipped with a tubular roller. At the customer's request, instead of the tube roller, we can install a double barbed roller known for use in the GSH XL chisel plow. The use of this roller ensures adequate seasoning and leveling of cultivated soil. The machine is available with 3 and 5 teeth. Depending on the version, tractors with power from 120 HP to 300 HP are required to work with the GHL subsoiler. Standard equipment includes cured carbide coulters and hydraulic stone coulter protection.
    Add to List
    Tractor power requirements
    130.000000 HP
    Working width
    200.000000 cm
    Row spacing
    67.000000 cm
    Stone safety device
    Hydraulic
    Working depth
    50.000000 cm
  13. MGW 5 3000

    The Mandam subsoilers with the MG and MGW symbols are tools that ensure deep loosening of the soil without disturbing its layered structure and eliminates the plow sole. Thanks to this machine, aeration and irrigation of the lower layers of soil is achieved, this operation is carried out every 3-4 years, especially in fields where water stands on the surface. Mandam offers subsoilers with a pipe roller fi 540 mm (MGW series) and without shafts (MG series) with screw protection. Moles are optionally offered - weights attached to the subsoiler teeth for better water circulation in the soil.
    Add to List
    Tractor power requirements
    200.000000 HP
    Working width
    300.000000 cm
    Row spacing
    60.000000 cm
    Stone safety device
    Shear bolt
    Working depth
    60.000000 cm
Page
Set Descending Direction