No-tillage seeders

Page
Set Descending Direction
  1. There are more products that fulfill technical criteria for your country available through vendors from abroad.
  2. Millenyum 28

    Millenyum Series Seeders are suitable for direct sowing. It's possible to seed standard size crops such as wheat, barley, oat, lentil, chickpeas, beans e.t.c. It low horsepower requirement due to the trailed system. Milenyum Series has standardly seed and fertilizer hopper but also possible to have only seed
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    130.0 HP
    Working width
    392.00 cm
    Number of rows
    28.000000
    Mode seed placement
    Mechanic
    Seed tank size
    405 l
  3. Horsch Avatar 3.16 SD

    Compact, manoeuvrable machine. HORSCH seed waggon concept for maximum efficiency; Well-proven folding concept with compact transport dimensions; telescopic axle guarantees stability in the field, even in extremely hilly terrain and a maximum transport width of 3.00 m on the road; Large tyres at the seed waggon for maximum soil conservation and load-bearing capacity even in wet conditions; Single-row design with SingleDisc coulter with row spacing of 25 cm; Thus, it is also ideal for mechanical population control; Light-weight machine with integrated weight transfer and distribution to the coulter wings for homogeneous coulter pressure at all seed row to the very outside; Low horsepower requirement due to little movement of soil; Standard: mechanical half-width shut-off; Optional: electric half-width shut-off to be controlled via the ISOBUS terminal or automatic with SectionControl activation (incl. micro-granular unit).
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    125.0 HP
    Working width
    310.00 cm
    Number of rows
    18.000000
    Mode seed placement
    Pneumatic
    Seed tank size
    3800 l
  4. Regina Plus RSC 300

    Tractor-drawn seed drill, three-point hitch, quick coupling, oscillating connection. Reduced dimensions and great working width same of overall dimension. Load-bearing tubular frame. Hopper available in two versions: for seed only and for seed & fertilizer with detachable seed/fertilizer hopper panel – Rubber wheels 6.00 x 16 tractor. Lateral chain transmission with speed gearbox seed side and panel box for seeding test. Helicoidal seed distributor and fertilizerd in stainless steel with axial regulation. Manual, centralized regulation of seed depth (drawn version). Furrow openers on three rows
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    100.0 HP
    Working width
    300.00 cm
    Number of rows
    19.000000
    Mode seed placement
    Mechanic
    Seed tank size
    530 l
  5. Saphir 7/250-DS 150

    The Saphir 7 seeder works behind the tractor as a mechanical seeder mounted on the tractor's three-point hitch, or it can be used in combination with seedbed preparation implements. The peculiarity of this seeder is how it is driven in depth, namely: with the help of a three-point hitch of the front-going implement. Saphir 7 is equipped with a mechanical driven
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    100.0 HP
    Working width
    250.00 cm
    Number of rows
    17.000000
    Mode seed placement
    Mechanic
    Seed tank size
    650 l
  6. GASPARDO SC MARIA 360

    Minimum Tillage Seed Drills with fertilizer box
    Add to List
    Seeding type
    Seed drill
    Tractor power requirements
    100.0 HP
    Working width
    3.60 cm
    Number of rows
    25.000000
    Mode seed placement
    Mechanic
    Seed tank size
    815 l
  7. UST 600

    Pneumatic seed drill (3 point hitch version) for wheat, rice, pea, soy and alfalfa with a tractor power requirement of 170-180 hp. It can plant up to  20 rows, with a seed tank size of 3000 liter and a total working width of 3,5 m
    Add to List
    Seeding type
    Seed drill
    Tractor power requirements
    170.0 HP
    Working width
    350.00 cm
    Number of rows
    20.000000
    Mode seed placement
    Pneumatic
    Seed tank size
    3000 l
  8. DS 16

    The DS no-till seeder is designed for row-free sowing of cereal crops, such as wheat, barley, oats, rye, clover and rapeseed with simultaneous cutting of stubble and weeds, applying granular mineral fertilizers to the soil and rolling the soil. It allows you to save on fuel and lubricants and labor resources. In addition, the number of equipment required for sowing is significantly reduced, since the seeder performs several operations at once: tillage, fertilization, sowing grain and packing the sown crops. Contributes to make conditions for protection against soil erosion. Helps maintain optimal moisture levels in the soil when planting crops
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    70.0 HP
    Working width
    240.00 cm
    Number of rows
    16.000000
    Mode seed placement
    Mechanic
    Seed tank size
    1210 l
  9. GASPARDO PINTA 400

    Pneumatic Drill for tilled soils
    Add to List
    Seeding type
    Seed drill
    Tractor power requirements
    80.0 HP
    Working width
    4.00 cm
    Number of rows
    32.000000
    Mode seed placement
    Pneumatic
    Seed tank size
    1000 l
  10. Horsch Avatar 12 SD

    Compact, manoeuvrable machine. HORSCH seed waggon concept for maximum efficiency; Seed waggon Avatar 12 SD with a capacity of 5 800 litre; Well-proven folding concept with compact transport dimensions; telescopic axle guarantees stability in the field, even in extremely hilly terrain and a maximum transport width of 3.00 m on the road; Large tyres (Avatar 12 SD: 520 / 85 R 38 at the seed waggon for maximum soil conservation and load-bearing capacity even in wet conditions; Single-row design with SingleDisc coulter with row spacing of 25 cm; Thus, it is also ideal for mechanical population control; Light-weight machine with integrated weight transfer and distribution to the coulter wings for homogeneous coulter pressure at all seed row to the very outside; Low horsepower requirement due to little movement of soil; Standard: mechanical half-width shut-off; Optional: electric half-width shut-off to be controlled via the ISOBUS terminal or automatic with SectionControl activation (incl. micro-granular unit).
    Add to List
    Seeding type
    Seed drill
    Tractor power requirements
    300.0 HP
    Working width
    1200.00 cm
    Number of rows
    48.000000
    Mode seed placement
    Pneumatic
    Seed tank size
    5800 l
  11. Saphir 8/300-DS 150

    Saphir 8 has a seeding shaft drive carried out electrically with electronically controlled number revolutions. As a result, different crops can be sown reliably and precisely: calibrate once and the sowing rate is already set. Electric motor and computer located in front seeders and are reliably protected from external influences, maintenance is comfortable via the display of the on-board computer Solitronic from the cockpit tractor. This makes it possible, for example, during work change the seeding rate at the push of a button
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    100.0 HP
    Working width
    300.00 cm
    Number of rows
    20.000000
    Mode seed placement
    Mechanic
    Seed tank size
    800 l
  12. Matermacc AS-F-450

    Pneumatic seed drill (3 point hitch version) for cereals, rapeseed, forage or catch crops with a tractor power requirement of 120-130 hp. It can plant up to 15 rows, with a seed tank size of 1.200 liter and a total working width of 3.5 m
    Add to List
    Seeding type
    Seed drill
    Tractor power requirements
    120.0 HP
    Working width
    350.00 cm
    Number of rows
    15.000000
    Mode seed placement
    Pneumatic
    Seed tank size
    1200 l
  13. Saphir 8/400-DS AutoLoad 125

    Saphir 8 has a seeding shaft drive carried out electrically with electronically controlled number revolutions. As a result, different crops can be sown reliably and precisely: calibrate once and the sowing rate is already set. Electric motor and computer located in front seeders and are reliably protected from external influences, maintenance is comfortable via the display of the on-board computer Solitronic from the cockpit tractor. This makes it possible, for example, during work change the seeding rate at the push of a button
    Add to List
    Seeding type
    Seed planter
    Tractor power requirements
    120.0 HP
    Working width
    400.00 cm
    Number of rows
    32.000000
    Mode seed placement
    Mechanic
    Seed tank size
    1050 l
Page
Set Descending Direction