Subsoilers

Page
Set Descending Direction
  1. There are more products that fulfill technical criteria for your country available through vendors from abroad.
  2. CPHD-7

    Chisel plow
    Add to List
    Tractor power requirements
    90.0 HP
    Working width
    230 cm
    Row spacing
    30 cm
    Number of shanks/tines
    7
    Stone safety device
    Spring
    Working depth
    40 cm
  3. U401/11

    Subsoiler with plow tines and a shaft
    Add to List
    Tractor power requirements
    150.0 HP
    Working width
    300 cm
    Row spacing
    50 cm
    Number of shanks/tines
    6
    Stone safety device
    Shear bolt
    Working depth
    40 cm
  4. U401/10

    Subsoiler with plow tines and a shaft
    Add to List
    Tractor power requirements
    110.0 HP
    Working width
    240 cm
    Row spacing
    60 cm
    Number of shanks/tines
    4
    Stone safety device
    Shear bolt
    Working depth
    40 cm
  5. GZ-3/M

    Subsoilers are machines mounted on a three-point linkage of the tractor (TUZ), intended for cooperation with agricultural tractors of the 0.6 ÷ 0.9T class. The working elements are claws (900 mm) with replaceable coulters (100 mm) and a mole mounted on a chain. Subsoilers are intended for crushing and loosening the subsoil. This is to make it easier for plant roots to penetrate into the inner soil layers, increase water and air permeability, allow the transfer of fertilizers to deeper soil layers and prevent the formation of water pools. Subsoil soils do not require deep plowing and some plants can be grown using only tillage tools. The structure of the machine was made of welded and bolted steel elements.
    Add to List
    Tractor power requirements
    122.0 HP
    Working width
    70 cm
    Row spacing
    140 cm
    Number of shanks/tines
    3
    Stone safety device
    Shear bolt
    Working depth
    70 cm
  6. Kret Tolmet 3 Shine

    The subsoiler is intended for crushing and loosening the soil in order to improve its physical and biological properties. The subsoiler loosens the soil layer that has not been moved by plowing and enables better soaking and oxygenation, which promotes the development of plant roots. As a result of subsoiling, fertilizers are moved to the deeper layers of the soil. It should be used on medium and compact soils as well as on light soils with impermeable ground. The subsoiler ensures proper loosening to a depth of 60 cm. The subsoiler can be equipped with a tubular or mulching roller, whose task is to regulate the working depth and level the soil after the subsoiler has passed. Power requirement for a 3-leg machine from 100 HP.
    Add to List
    Tractor power requirements
    100.0 HP
    Working width
    330 cm
    Row spacing
    110 cm
    Number of shanks/tines
    3
    Stone safety device
    Shear bolt
    Working depth
    60 cm
  7. GSC 300

    Curved undercut teeth with a chisel (replaceable coulters) Support wheels Tear-off or spring protection NON-STOP Body spacing 56 cm Frame height 90 cm Adjustable tooth spacing
    Add to List
    Tractor power requirements
    140.0 HP
    Working width
    300 cm
    Row spacing
    46 cm
    Number of shanks/tines
    4
    Stone safety device
    Spring
    Working depth
    55 cm
  8. GSC 300

    Curved undercut teeth with a chisel (replaceable coulters) Support wheels Tear-off or spring protection NON-STOP Body spacing 56 cm Frame height 90 cm Adjustable tooth spacing
    Add to List
    Tractor power requirements
    140.0 HP
    Working width
    300 cm
    Row spacing
    46 cm
    Number of shanks/tines
    4
    Stone safety device
    Spring
    Working depth
    55 cm
  9. GZW 3

    The subsoiler is intended for crushing and loosening the soil in order to improve its physical and biological properties. The subsoiler loosens the soil layer, which is not moved by plowing, and allows it to better absorb and oxygenate, which promotes the development of plant roots. As a result of subsoiling, fertilizers are moved to deeper layers of soil. It should be used on medium and firm soils, as well as on light soils with impermeable ground. The subsoiler ensures proper loosening to a depth of 60 cm. The subsoiler is high equipment. The subsoiler is equipped with a tubular roller, whose task is to regulate the depth of work and level the soil after passing the subsoiler.
    Add to List
    Tractor power requirements
    80.0 HP
    Working width
    220 cm
    Row spacing
    70 cm
    Number of shanks/tines
    3
    Stone safety device
    Shear bolt
    Working depth
    60 cm
  10. Musca U476

    The Musca subsoiler is intended only for deep loosening of the soil, and the comb combing it rakes and levels the surface of the uplifted soil, which reduces the evaporation of water from the soil and accelerates the emergence of seeded seeds during harvesting. The treatment should be applied on fields with a "plow sole", preferably after harvesting, when the soil is desiccated, and in a subsoiled field should not be carried out too soon to reduce soil re-compaction. The subsoiler can also be used to prepare the soil before planting fruit trees, berry shrubs and deep-rooted plants.
    Add to List
    Tractor power requirements
    96.0 HP
    Working width
    2 cm
    Row spacing
    1 cm
    Number of shanks/tines
    3
    Stone safety device
    Shear bolt
    Working depth
    45 cm
  11. GZ/M

    Subsoilers are machines mounted on a three-point tractor suspension system (TUZ), designed to work with agricultural tractors of 0.6 ÷ 0.9T class. Working elements are claws (900 mm) with replaceable coulters (100 mm) and a mole attached to the chain. The subsoilers are intended for crushing and loosening the subsoil. This is to make it easier for plant roots to penetrate into the inner layers of the soil, increase water and air permeability, to allow fertilizers to move to deeper layers of the soil and to prevent water clogging. Subsoiled soils do not require the use of deep plowing, and some plants can be grown using only tillage tools. The machine structure was made of welded and bolted steel elements.
    Add to List
    Tractor power requirements
    61.0 HP
    Working width
    130 cm
    Row spacing
    0 cm
    Number of shanks/tines
    1
    Stone safety device
    Shear bolt
    Working depth
    70 cm
  12. CLG-II

    Small sized subsoiler with two shanks, a working depth of 55-65 cm and a tractor power requirement of 140 hp. The working width is 1.2-2.25 m and for protection it is equipped with a spring protection stone safety device.
    Add to List
    Tractor power requirements
    140.0 HP
    Working width
    225 cm
    Row spacing
    113 cm
    Stone safety device
    Spring
    Working depth
    55 cm
  13. Armes 3,0

    Subsoiler Armes. Max depth 60 cm.
    Add to List
    Tractor power requirements
    150.0 HP
    Working width
    300 cm
    Row spacing
    60 cm
    Stone safety device
    Shear bolt
    Working depth
    60 cm
Page
Set Descending Direction