Extruder machines

Filters  
Technology  
Country  
Area of use  
Type Of Savings  
Category  
Manufacturer  
Heating power  
Specific energy consumption (per load) (Euromap)  
Rated power  
Maximum output  
Screw diameter  
Page
Set Descending Direction
  1. There are more products that fulfill technical criteria for your country available through vendors from abroad.
  2. Single Screw Extruder

    PE Pipe Extrusion Machine, Autoloader, Designed output capacity: up to 350 kg/h
    Add to List
    Rated power
    109.90 kW
    Screw diameter
    60.00 mm
    Heating power
    17.50 kW
    Maximum output
    350.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.33 kWh/kg
  3. EPK

    The extruder, designed to work in tube and film lines, is equipped with a barrier screw, which ensures the highest melt quality and excellent productivity. Screw pairs are nitrided
    Add to List
    Rated power
    25.60 kW
    Screw diameter
    36.00 mm
    Heating power
    9.00 kW
    Maximum output
    45.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.57 kWh/kg
  4. SLE 1-115K90

    The extruder-compactor produces polymer melt from film materials. Raw materials are loaded using a conveyor belt or from bobbins in a thermocompactor for compaction. In the thermocompactor, the raw material reaches the optimum temperature and density characteristics for processing in the extruder. The resulting melt goes through a filtration stage and can be used for the production of granules and other polymer products
    Add to List
    Rated power
    151.00 kW
    Screw diameter
    115.00 mm
    Heating power
    51.00 kW
    Maximum output
    700.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.21 kWh/kg
  5. EPS 15x30

    Extruder eps 150x30 is designed for processing granular polymer materials and transferring the molten mixture to the extrusion head for subsequent application of the mass to the metal. The design features of the extruder allow the unit to be used indoors, in compliance with all established requirements and rules of fire and environmental safety
    Add to List
    Rated power
    348.10 kW
    Screw diameter
    150.00 mm
    Heating power
    67.00 kW
    Maximum output
    750.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.46 kWh/kg
  6. SLE 1-150

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    196.60 kW
    Screw diameter
    150.00 mm
    Heating power
    50.00 kW
    Maximum output
    1000.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.19 kWh/kg
  7. SLE 1-130M

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    266.60 kW
    Screw diameter
    130.00 mm
    Heating power
    120.00 kW
    Maximum output
    700.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.38 kWh/kg
  8. SLE 1-115

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    171.60 kW
    Screw diameter
    115.00 mm
    Heating power
    25.00 kW
    Maximum output
    300.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.57 kWh/kg
  9. SLE 1-90

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    111.10 kW
    Screw diameter
    90.00 mm
    Heating power
    50.00 kW
    Maximum output
    250.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.44 kWh/kg
  10. SLE 1-70

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    66.10 kW
    Screw diameter
    70.00 mm
    Heating power
    25.00 kW
    Maximum output
    120.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.55 kWh/kg
  11. SLE K-125

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    115.10 kW
    Screw diameter
    115.00 mm
    Heating power
    54.00 kW
    Maximum output
    400.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.29 kWh/kg
  12. SLE K-90

    The screw extruder is a productive plasticizing equipment using an automated dosing unit, designed for plasticizing granules, crushed or agglomerated (outside the extruder) crumb no more than 15 mm in size, as well as for the production of other materials based on high pressure / low pressure polyethylene, polystyrene, polypropylene , ABS plastic
    Add to List
    Rated power
    111.10 kW
    Screw diameter
    90.00 mm
    Heating power
    50.00 kW
    Maximum output
    250.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.44 kWh/kg
  13. MAS 186

    output depending on viscosity and properties of the input-material, moisture content as well as filtration-fineness.
    Add to List
    Rated power
    400.00 kW
    Screw diameter
    186.00 mm
    Heating power
    80.00 kW
    Maximum output
    2500.00 kg/h
    Specific energy consumption (per load) (Euromap)
    0.16 kWh/kg
Page
Set Descending Direction