By using this site, you confirm that you accept our Terms and Conditions as well as our Cookies Policy. Read more.
Land preparation and seeding
- There are more products that fulfill technical criteria for your country available through vendors from abroad.
-
U 619 4,0m
By RolmakoThe subsoiler U 619 has been designed as a tool satisfying all the user's requirements, the adjustable spacers of the subsoiler allow adaptation to every farm tractor.Tractor power requirements330.0 HPWorking width400.00 cmRow spacing25 cmStone safety deviceSpringWorking depth70 cm
Saphir 7/300-DS 125
By LemkenThe Saphir 7 seeder works behind the tractor as a mechanical seeder mounted on the tractor's three-point hitch, or it can be used in combination with seedbed preparation implements. The peculiarity of this seeder is how it is driven in depth, namely: with the help of a three-point hitch of the front-going implement. Saphir 7 is equipped with a mechanical drivenSeeding typeSeed planterTractor power requirements100.0 HPWorking width300.00 cmNumber of rows24.000000Mode seed placementMechanicSeed tank size800 l
DS 16
The DS no-till seeder is designed for row-free sowing of cereal crops, such as wheat, barley, oats, rye, clover and rapeseed with simultaneous cutting of stubble and weeds, applying granular mineral fertilizers to the soil and rolling the soil. It allows you to save on fuel and lubricants and labor resources. In addition, the number of equipment required for sowing is significantly reduced, since the seeder performs several operations at once: tillage, fertilization, sowing grain and packing the sown crops. Contributes to make conditions for protection against soil erosion. Helps maintain optimal moisture levels in the soil when planting cropsSeeding typeSeed planterTractor power requirements70.0 HPWorking width240.00 cmNumber of rows16.000000Mode seed placementMechanicSeed tank size1210 l
U 628 2,5m
By RolmakoU 638 is a machine whose design was not allowed the slightest compromise in quality, all the elements mounted in the machine are the highest quality components found only in the most expensive machines on the marketTractor power requirements100.0 HPWorking width250.00 cmRow spacing36 cmStone safety deviceSpringWorking depth70 cmTractor power requirements100.0 HPWorking width300.00 cmRow spacing60 cmNumber of shanks/tines11Stone safety deviceShear boltWorking depth40 cmTractor power requirements140.0 HPWorking width300.00 cmRow spacing46 cmNumber of shanks/tines4Stone safety deviceSpringWorking depth55 cm
Queen 250/5
By NARDI S.r.L.The subsoilers series Queen are particularly designed to work the soil in deep, altough there are surface with clods. Thus two important results can be obtained: It is possible to substitute or alternate the plough, when the superficial vegetation is limited. It can be obtained a crumbled layer in deep which allows to drain the rain and store moisture in the ground. The shanks are made in special steel with specific heat treatments and are fitted with tractive shear bolt. The shaped structure and sturdy frame allows to add shanks to increase working widthTractor power requirements120.0 HPWorking width250.00 cmRow spacing50 cmNumber of shanks/tines5Stone safety deviceShear boltWorking depth60 cm
Turbosem 19-16
Turbosem air-drill is a multi-functional seeding machine, which is intended for direct seeding. The machine can place seeds regardless of previous soil tillage (conventional, mini-till and no-till). It performs uniform seed placement due to the opener's design, which allows to follow the soil contour. Suitable for different crops: cereals, small grains, row-crops. This machine is capable of applying dry fertilizers together with seeds and separately. Mobile and compact Turbosem 19-16 features low power requirement. Thus, it can be pulled by tractors with a horsepower rating starting from as low as 100 h.p. This is an ideal solution for small farms. Turbosem drills feature high capacity and cost effectiveness along with simplicity and convenience in maintenance and use.Seeding typeSeed drillTractor power requirements100.0 HPWorking width300.00 cmNumber of rows16.000000Mode seed placementPneumaticSeed tank size5700 l
DS 18
The DS no-till seeder is designed for row-free sowing of cereal crops, such as wheat, barley, oats, rye, clover and rapeseed with simultaneous cutting of stubble and weeds, applying granular mineral fertilizers to the soil and rolling the soil. It allows you to save on fuel and lubricants and labor resources. In addition, the number of equipment required for sowing is significantly reduced, since the seeder performs several operations at once: tillage, fertilization, sowing grain and packing the sown crops. Contributes to make conditions for protection against soil erosion. Helps maintain optimal moisture levels in the soil when planting cropsSeeding typeSeed planterTractor power requirements75.0 HPWorking width280.00 cmNumber of rows18.000000Mode seed placementMechanicSeed tank size1350 lTractor power requirements40.0 HPWorking width150.00 cmRow spacing60 cmNumber of shanks/tines5Stone safety deviceSpringWorking depth40 cmTractor power requirements100.0 HPWorking width300.00 cmRow spacing60 cmNumber of shanks/tines11Stone safety deviceSpringWorking depth40 cmTractor power requirements60.0 HPWorking width200.00 cmRow spacing60 cmNumber of shanks/tines7Stone safety deviceShear boltWorking depth40 cm
Developed with support of: 
